Filling and sealing machine

Patent Name A Filling and Sealing Machine Patent Applicant Xie Jianfeng Principal Applicant Address 201305 No.4633, Sansan Road, Shuyuan Town, Nanhui District, Shanghai, China Inventor Xie Jianfeng Application (Patent) No. 200420090035.0 Date of Application 2004.09.14 Issuing Date Approval No. 2728912 Approved Announcement Date 2005.09.28 Manual CD-ROM D0539 Main Classification Number B65B1/00 Classification Number B65B1/00; B65B3/00 Distribution Original Application No. Priority Abstracts This utility model discloses a filling and sealing machine, including a rack, active Sprockets, electric cutters, container holders, conveyor chains, heaters, passive sprocket, quad nozzles, cartridges, defoamers, film holders, printers, gearboxes, adjustable linkages, speed regulators, handles, The adjusting rod and the rolling bearing actuate the upper end of the front cam groove of the double-sided cam, and the groove is provided with the structure of the rolling bearing, which overcomes the general movement of the packing machine and uses the air cylinder, which often causes the conveying and the packaging to be out of synch, the adjustment is relatively difficult, and the packaging quality is difficult to guarantee. At the same time, it must be equipped with air compressors. The noise is large, which directly affects the defects of the operating environment and overcomes high-speed operation. In the case of large vibrations, unstable packaging and cutting, it is difficult to produce defects of large-span sealing and packaging machines, which expands the scope of use, makes smooth progress, and ensures reliable packaging and cutting. It is a new generation of filling and sealing machines and can be completely replaced. Existing products have broad market prospects. Sovereignty items 1. A filling and sealing machine, comprising a frame (6), a drive sprocket (1), a knife (2), a container holder (3), a conveyor chain (4), a heater (5), passive Sprockets (7), Quad nozzles (8), Cartridges (9), Defoamers (10), Membrane holders (11), Printers (12), Transmission (20), Adjustable linkages (24) The structure of the speed regulator (22), the handle (23) and the adjusting rod (24) is characterized in that: the output shaft of the speed regulator (22) is connected to the oscillating double-sided cam (21), and the double-sided cam is driven (21) The front cam groove is provided with a rolling bearing, the rolling bearing is connected with the push plate (19), the push plate (19) is connected with the adjustable link (18), and the adjustable link (18) is connected with the front guide plate in succession ( 13) Rear guide plate (14), front guide plate (13), rear guide plate (14) and two heaters (5) are operatively connected by a connecting rod (15) to drive the cam groove of the double-sided cam (21) through the rolling bearing and The adjusting rod (24) is loosely connected, and one end of the connecting rod (16) is operatively connected to the adjusting rod (24) through an adjusting bolt (17), and the other end is connected to the front guide plate (13) through the pin shaft. The handle (24) is fixed on the driving double On the rim side of the face cam (21), the cam groove on the rear face of the double-sided cam (21) is straightened through the rolling bearing Or by a bridge structure and the adjusting lever (24) active connections, the push plate (19), the front face guide (13), the rear guide (14) fixed to the bracket through the respective axes. International Application International Announcement Date of Entry into the Country Patent Agency Shanghai Xintian Patent Agency Co., Ltd. Agency Address