The switch is a follow-up product of the hub. It is unmatched by the hub in terms of speed and function. Its main function is to realize the interconnection and intercommunication of multiple computers, which is equivalent to the role of "intermediary". Many people may switch to the switch. How to use it , don't worry, don't worry, the following decoration house decoration network small series will bring you the use of the switch, I hope to help everyone.
How is the switch used correctly?
1. Direct connection between two machines : that is, one of the computers is connected to the ADSL Modem, and then directly connected to another computer through the network card. If you use this kind of connection, you need to set up internet sharing proxy on the computer with broadband access , such as installing wingate and other agent software to realize dual-network sharing. This is the cheapest network.
2 , switch + network card + computer : If your ADSLModem comes with broadband routing function ( please check the product manual ) , then you can save the router. This is the only difference from the above three methods. It is also more convenient to connect. It does not need to be set at all. The connection method is as follows: The LAN port of ADSLModem is connected with any port of the switch by twisted pair cable, and then each computer can be connected to the remaining ports of the switch.
3 , broadband router + switch + network card + computer :: This method is used when the shared computer is larger than the broadband router switch port. At this time, the switch needs to be helped, and the switch of the corresponding port is selected according to the number of shared computers. That is to say, all shared computers are connected to the switch first, and then connected to the broadband router through the switch, thereby achieving shared Internet access.
How to use the switch:
First connect the power cable of the switch successfully. After the power connection is successful, there will usually be a light on the side and the front. Next, we connect the network cable, connect the external broadband cable to one of the interfaces of the switch, and then connect the switch to your computer with the network cable. During the connection process, you can check the front indicator light. Successful.
Next we need to set up a host, a fixed IP address, such as 192.168.0.1, then another few computers IP should be set on the same network segment, that is to set to 192.169.0. * (Asterisk Represents any number below 255. ) After setting, we test whether it is successful, open the run input " cmd " and then PING command to see if the connection is successful.
Next, we will return to the host computer, which is 192.168.0.1 , click on the broadband connection in the network connection, right-click --- attribute --- advanced. Then set up the shared network. After setting it up, the words "shared" will be displayed after the broadband connection, so that's it.
Finally, the hint is that the way to connect to the switch is very simple, as long as you carefully look at the operating instructions of the switch, you can grasp the mystery.
The above is how the switch is brought to you by Xiaobian. The entire contents of the use of the switch, I believe that everyone has a basic understanding of how to use the switch after reading this article, if you want to know more about the decoration consultation, please click to enter the decoration knowledge channel .
More related wonderful reading:
How is the switch classified? Common switch classification
What is a wireless switch? What is the difference with a wireless router?
What is a digital switch? Introduction to the role of digital switches
Is the switch hot? What should I do if the switch is hot?
What brand of switch is good? Switch brand leaderboard
Oval Pedal Bin,Oval Foot Pedal Bin,Steel Pedal Trash Bin,Oval Steel Pedal Bin
Qin Jian International Limited , https://www.luanbosmart.com