The height of the folding knife blade is too low, and the amount of clamping of the signatures is very small, or even the signatures are not clamped, which is not conducive to the transfer of the signatures on the splint; Due to the limited opening of the splint, it will be difficult for the folding knife to retract, and it may be possible to pull out the signature and cause the folding fault.
Solution: Adjust the height of the folding knife blade to an appropriate position.
The relative position of the folding knife blade and the splint
The splint consists of a fixed splint and a movable splint. The folding knife blade is too close to the fixed splint, which will cause the retracting of the knife to be completed but the movable splint is not completely closed, causing the signature to run out of control. Make it difficult to withdraw the knife, and dial out the signature.
Solution: Adjust the relative position of the folding knife blade and the splint so that the folding knife blade is about 2/5 from the fixed splint and about 3/5 from the movable splint.
Flat Hospital Bed,Folding Hospital Bed,Foldable Medical Bed,Stainless Steel Flat Bed
Jiangmen Jia Mei Medical Products Co.,Ltd. , https://www.jmmedicalequipment.com