The simulated automobile transportation vibration table simulates the destructiveness caused by the bumps in the transportation. The simulated automobile transportation vibration table mainly produced by Ai Sihao is a simple sine wave vibration, and the corresponding standard specifies the measurement method of the vibration environment of electric and electronic products. It is applicable to the measurement of vibration environment of electrical and electronic products used in all places. The measurement target setting is generally composed of three parts: sensor, preamplifier and recording device.
The general requirements for the simulation of automobile transportation vibration table 13532307059 Xiaofang: The measurement system should be calibrated by the metrological inspection department or the standard instruments and equipment approved by the metrological inspection department, and should be able to be used in the environment in which it is used (eg Under normal operation under vibration, shock, constant acceleration, temperature, humidity and low pressure, the measuring instruments should have good matching and reliable connection. The whole measuring system should be grounded at a single point to avoid the formation of ground loop. Simulated automobile transportation vibration table system characteristics requirements: The available frequency range and dynamic range of the whole measurement system should meet the requirements of the vibration environment to be measured. The frequency response (straight part) error of the measurement system should be less than ±1dB, and the nonlinear error of the measurement system. Should be less than ± 5%.
The analog car transport vibration table in the specification is a relatively neutral comparison, and now the product division is a form change that will encounter different distinctions. The means of opposing product use are also different. For example, in many cases, the scenes we face are not opposite. The opportunities for planning are also different in nature. The way is always concluded in many aspects. The ability to calculate is also unveiled to launch new products. What we need to do is to make our products sell better.
Choicy aesthetic machine manufacturer provide Fractional COâ‚‚ Laser Therapy Machine,Medical Fractional COâ‚‚ Laser Machine,Fractional COâ‚‚ Laser for beauty salon. This fractional co2 laser machine can treat acne, spots, such as melasma, freckles, mole, surgery, and vaginal treatment. The dermatology co2 laser equips with two cutting tips, and a scanning head. It is widely used in dermatologists, doctors, etc. We encourage you to make get hold of, as we've been wanting for companions inside our venture. We are sure you'll uncover doing company with us not only fruitful, but also profitable. We've been prepared to provide you with what you require.
To view the full range of laser machines that we have available, you are welcome to contact us to have a video online meeting to see the machines up close and personal. Also, please send your requirements with a detailed list including the style/item and quantity you require. We will then send our best prices to you. Manufacturers Machine Operation training is included with all machines and no previous experience is required.
Application area
Dermatology Center
Medical Clinic
Co2 Fractional Laser Machine,Fractional Co2 Laser Machine,Medical Co2 Laser,Laser Co2 Fractional
Choicy , https://www.choicygroup.com