Porcine endothelial nitric oxide synthase (eNOS) ELISA kit

Porcine endothelial nitric oxide synthase (eNOS) ELISA kit instruction manual
This kit is for research use only
Intended application
Quantitative determination of eNOS in pig serum, plasma, cell culture supernatant or cell lysate by ELISA.
Experimental principle
This kit uses double antibody sandwich enzyme-labeled immunoassay to determine the eNOS level in the specimen. The microtiter plate was coated with purified antibody to make a solid phase antibody. The eNOS antigen, biotinylated anti-porcine NOS antibody, and HRP-labeled avidin were added to the microwells coated with mAb in sequence, and washed thoroughly. Substrate TMB color development. TMB is converted into blue under the catalysis of peroxidase, and into the final yellow under the action of acid. The color depth is positively correlated with the eNOS in the sample. The absorbance (OD value) was measured with a microplate reader at a wavelength of 450 nm, and the sample concentration was calculated.
Kit composition
1. ELISA plate: one piece (96 wells)
2. Standard product (lyophilized product): 2 bottles, each bottle is diluted to 1ml with the sample diluent before use, and its concentration is 10000 pg / mL. After serial dilution, it is diluted to 10000 p / mL, 5000 respectively pg / mL, 2500 pg / mL, 1250 pg / mL, 625 pg / mL, 312 pg / mL, 156 pg / mL, the original solution is directly used as the highest standard concentration, and the sample dilution is directly used as the standard concentration 0 pg / mL, pro Prepare within 15 minutes before use.
3. Sample diluent: 1 × 20ml / bottle.
4. Antibody dilution A: 1 × 10ml / bottle.
5. Antibody Diluent B: 1 × 10ml / bottle.
6. Detection solution A: 1 × 120ul / bottle (1: 100) diluted with antibody dilution A1: 100 before use.
7. Detection solution B: 1 × 120ul / bottle (1: 100) diluted with antibody dilution B1: 100 before use.
8. Substrate solution: 1 × 10ml / bottle.
9. Concentrated washing solution: 1 × 30ml / bottle, each bottle is diluted 25 times with distilled water.
10. Stop solution: 1 × 10ml / bottle (2N H2SO4).

Collection and preservation of specimens
1. Supernatant of cell culture: collect the supernatant after centrifugation, and store the specimen at -20 ℃, and avoid repeated freezing and thawing.
2. Serum: Please leave the specimen at room temperature for 2 hours or overnight at 4 ° C and centrifuge at 1000 x g for 20 minutes. Take the supernatant for testing, or store the specimen at -20 ° C, but avoid repeated freezing and thawing.
3. Plasma: EDTA or heparin can be used as an anticoagulant. Centrifuge the sample at 2-8 ° C 1000 x g for 15 minutes within 30 minutes after collection, or store the specimen at -20 ° C, but avoid repeated freezing and thawing.
Note: Hemolysis of specimens will affect the final test results, so hemolysis specimens should not be tested.

Steps
Each reagent is equilibrated to room temperature before use.
1. Add sample: set blank hole, standard hole and sample hole to be tested respectively. In addition to the blank wells, add 100ul of the standard solution or the sample to be tested to the remaining wells and mix gently, at 37 ℃ for 120 minutes.
2. Discard the liquid and spin dry without washing.
3. Add 100ul of detection solution A working solution to each well at 37 ℃ for 60 minutes. Wash the plate 3 times, 350ul / per well, spin dry.
4. Add 100ul of detection solution B working solution to each well at 37 ℃ for 60 minutes, wash the plate 5 times and spin dry.
5. Add 90ul of substrate solution to each well in sequence, and develop color at 37 ° C in the dark for 30 minutes.
6. Add 50ul of stop solution to each well in sequence to stop the reaction. The optical density (OD value) of each well was measured sequentially with an enzyme-linked instrument at a wavelength of 450 nm.
Note:
1. One hole is left for each experiment as a blank zero-adjusting hole. No reagents are added to this hole, only the substrate solution and 2NH2SO4 are added at the end. Use this hole to adjust the OD value to zero when measuring.
2. To prevent the sample from evaporating, place the reaction plate in a closed box covered with a damp cloth during the test.
Washing method
Manual plate washing method: suck (do not touch the wall) or shake off the liquid in the enzyme plate; place a few layers on the experimental table
Absorb the paper with the microtiter plate down and force it several times; inject at least 0.4ml of the recommended washing buffer into the well and soak for 1-2 minutes. Repeat this process several times as needed.
Automatic plate washing: If there is an automatic plate washing machine, it should be used in the formal experiment process after being used skillfully.
Specificity
The kit can detect recombinant or natural swine NOS at the same time, and has no cross reaction with other related proteins.
Calculation
Taking the concentration of the standard as the abscissa (logarithmic coordinate) and the OD value as the ordinate (ordinary coordinate), draw a standard curve on semi-logarithmic coordinate paper, and find the corresponding concentration from the standard curve according to the OD value of the sample; Multiply by the dilution factor; or use the standard concentration and OD value to calculate the linear regression equation of the standard curve, substitute the OD value of the sample into the equation, calculate the sample concentration, and multiply by the dilution factor to obtain the actual concentration of the sample.
Precautions
1. The washing process is very important, inadequate washing is easy to cause false positives.
2. It is best to control the sampling time within 5 minutes. If there are many specimens, it is recommended to use a volley gun to add samples.
3. Please make a standard curve at the same time of each measurement, it is best to make a double hole.
4. If the content of the substance to be tested in the specimen is too high, please dilute it and then determine it. When calculating, please multiply by the dilution factor.
5. When preparing the standard and the working solution of the test solution, please prepare it with the corresponding diluent, not to be confused.
6. Please keep the substrate away from light.
examination range:
156 pg / mL -10000 pg / mL
Explanation
1. Kit storage: -20 ℃ (when not in use for a long time); 2-8 ℃ (when used frequently).
2. Validity: 6 months
3. The concentrated washing liquid will have salt precipitation, and it can be heated and dissolved in the water bath when diluted.
4. There may be inconsistencies between the Chinese and English instructions. Please refer to the English instructions.

Xiamen Huijia Biotechnology Co., Ltd. is a professional agent for many well-known brands in the international life science field. Committed to the sales and promotion of various ELISA kits, immunohistochemical kits, primary and secondary antibodies, cytokines, biological reagents, pipettes, and consumables.
Inquiry telephone 18906011628 http: //

Porcine endothelial nitric oxide synthase (eNOS) ELISA kit instruction manual

Slot Slider Plate

• The backing name plates for the sliding door signs come in a wide range of colour combinations.
• The front panel slides back and forth on a separate track. This sliding panel reveals the message on either side of the sliding sign. Eg In Session on one side, Available on the other. The holder for the sliding sign has end caps at either end. This prevents the panel from accidently being pushed out of the holder.
• On the front panel of the sliding sign you have the choice of placing your own message. Choose one that fits your own individual need. Conference Room, Meeting Room, Board Room, Consulting Room, Treatment Room, First Aid Room, Exam Room, Rest Room. The text for your sliding door sign is your choice.
• Precision engraving ensures that your sliding door sign is professional in every respect. The signs are impeccable in detail. We understand the importance of an office layout and the essential function of traffic flow within your offices.

Slider Sign,Conference Sign,Office Sign,Slot Slider Plate

Chengdu GodShape Sign Co., Ltd , https://www.signsgs.com