Opening up the new heaven and earth straw wallpaper is favored by consumers

With the improvement of people's living standards and the awareness of environmental protection, the environmental protection wind has become more and more fierce, and the straw wallpaper has become more and more popular among consumers. Some insiders predict that straw wallpaper will be a popular wall decoration material in the future.

What is straw wallpaper?

It is understood that the straw wallpaper is made of grass, hemp, bamboo, rattan, paper rope, veneer and other natural materials, which are hand-woven with traditional techniques. The straw wallpaper is breathable, environmentally friendly and elegant. The living space created by it can be described as the perfect combination of fashion and classics, which can fully reflect the modern people's pursuit of green space.

The person in charge of Shanghai Bimei Wallpaper Co., Ltd. told the author that at present, straw wallpapers are selling well and are very popular among domestic consumers. Its price is mainly between 40 and 200 yuan per square meter. The straw wallpaper is fine workmanship and light in texture; it is very convenient to clean, not only can be scrubbed with water, but also brushed. Straw wallpaper is more suitable for the living room TV wall, the partial wall of the entrance and study, and the aisle end wall. However, its durability and fire resistance are poor, and it is not suitable for occasions with large flow of people. When choosing a straw wallpaper, the dealer must check whether the texture of the straw is clear and the surface is not falling off.

Bimei Wallpaper is a professional straw-like wallpaper company that integrates production and sales. It mainly sells straw-like wallpapers. Since its establishment, the company has established long-term cooperative relations with Russia, South Korea, Japan, and the United States. Its straw wallpaper products have been fully affirmed by foreign customers and enjoy a good reputation.

Construction staff training is extremely important

The person in charge of Shanghai Bimei Wallpaper Co., Ltd. revealed to the author that the straw wallpaper has a large shrinkage and is prone to bubbles and wrinkles, so the construction workers are highly demanded. The company has systematically trained construction personnel to improve their operational capabilities and work efficiency, and to improve customer satisfaction.

Tips: Main contents of construction personnel training:

Wall requirement

For the straw wallpaper with thin paper surface, carefully check whether the color of the varnish on the wall is consistent before construction to prevent the bottom from being penetrated; ensure that the wall surface is flat and varnished to ensure a clean and dust-free construction environment.

Glue requirements

When the construction personnel paste the straw wallpaper, they should use the sticky special straw glue.

Gluing method

Machine construction

Glue the back of the paper, seal it with an edge banding, and brush the glue 30 minutes before the wall. The straw wallpaper cannot be wiped, the seam will not be cleaned after overflowing, and a “bright band” will appear on the surface of the wallpaper. Therefore, when using the machine to apply glue, use a protective tape to avoid the glue spilling onto the surface of the wallpaper.

2. Manual construction

Glue the back of the paper to ensure the adhesiveness of the glue. Seal it with an edge band (protective tape) on the side so that the glue does not overflow and brush the glue 30 minutes before the wall.

Seam requirements

The straw wallpaper is handmade by natural materials, so it is impossible to match the flowers, and the joints cannot be matched. This is normal. The construction personnel should explain the construction and the customer before the construction, and confirm with the customer after 2 to 3 constructions. The construction can be continued after the customer approves.

When constructing seams, the construction personnel should pay attention to the following items:

1. Use a sharp blade to cut a piece of the film after cutting a seam to ensure that the slit is not wrinkled and does not burr. The degree of force should also avoid cutting the wall with the blade (please try from the tip when cutting) cut).

2. When the seam is torn open, make up the thin glue. Make sure that the glue does not overflow the seam. Wear white gloves during the construction.

3. Use a large scraper (or a dry scraper on a PVC scraper) to scrape flat over a large area. Part of the straw is not affected by the overall effect.

4. After the seam is filled with glue, use a special soft pressure roller to gently press to ensure the joint is tight, and use a dry towel or sponge to suck out a small part of the glue (try to ensure that the glue does not overflow).

Paving requirements

When laying the straw wallpaper, the construction staff should carefully level it from top to bottom. Due to the shrinkage of the surface natural straw and the shrinkage of the paper base, it is likely to cause bubbles and wrinkles, which need to be patiently smoothed. At the same time, the construction personnel should do a good job of collecting and avoiding the situation of starting and even slanting.

Post-construction requirements

Do not open the door or open the window for ventilation within 48 hours after construction. The construction personnel should explain the precautions for maintenance to the customer.