NEC thermal imaging camera F30 and G30 parameters comparison
NEC thermal imaging camera F30 and NEC thermal imaging camera G30 are two low-end infrared thermal imaging cameras under NEC. The parameters are similar and the prices are relatively cheap.
The parameters of F30 and G30 are almost the same. The detector pixels are all 160 * 120, with infrared visible light image shooting function. Both have the same field of view and wavelength range and the same accuracy. In addition, all have display alarm / color alarm, with isotherm function.
Both F30 and G30 thermal imaging cameras have a frame frequency of 8.5 Hz, and no import approval is required, which greatly reduces the lead time.
The difference between F30 and G30 lies in: G30's thermal sensitivity is 30 ℃ and S / N gain is 0.1 ℃, while F30 is 0.2 ℃ under the same conditions; F30's temperature measurement range is -10-350 ℃, while G30 It is -20-350 ℃; NiMH batteries for F30 and rechargeable Li batteries for G30 work for up to 5 hours; G30 can be operated with one hand, F30 is not convenient for one-handed operation; in addition, visible light images of G30 can be displayed directly Detect the temperature, which is more convenient for fault analysis; G30 and TS9500LT software for infrared heat map analysis to make the report more professional and easier for customers to solve problems.
Related technical parameters comparison:
parameter
G30
F30
Temperature measurement range
-20-350 ℃
-10-350 ℃
Thermal sensitivity
NETD
0.2 ℃ (at 30 ℃)
0.1 ℃ (S / N gain at 30 ℃)
0.2 ℃ (S / N gain at 30 ℃)
detector
Uncooled focal plane detector
160 × 120
Uncooled focal plane detector
160 × 120
Wavelength range
8-13um
8-13um
Frame rate
8.5 frames / s
8.5 frames / s
Sight
28 ° (H) × 21 ° (V)
28 ° (H) × 21 ° (V)
Spatial resolution IFOV
3.1mrad
3.1mrad
Focus range
10cm-∞
Temperature accuracy 50cm-∞
10cm-∞
Temperature accuracy 50cm-∞
Focus function
Manual, automatic above 1.3m
Manual, automatic above 1.3m
Accuracy
± 2 ℃ or ± 2% of reading select the maximum value
± 2 ℃ or ± 2% of reading select the maximum value
Visible light camera
7 million pixel CMOS camera
7 million pixels
temperature display
Center value, maximum, minimum, movable point (one point), ⊿T
Center value, maximum, minimum, movable point (one point), ⊿T
Emissivity correction
Have
Have
Background compensation
Have
Have
Isotherm
Have
Have
Call the police
Screen alarm, color alarm
Screen alarm, color alarm
Palette
4 types, rainbow, iron red, iris, BW
3 types
Video output
NTSC / PAL
NTSC / PAL
Image storage mode / media
JPEG / SD card
JPEG / SD card
PC interface
USB2.0
USB2.0
software
INFREC analysis software NS9500LT
Analyzing Software
battery
Li rechargeable battery, can work for 5 hours
NIMH battery
Operating temperature
-15-50 ℃
-15-50 ℃
Shock and shock resistance
294m / sec2 (3G), 29.4m / sec2 (30G)
294m / sec2 (3G), 29.4m / sec2 (30G)
size
80mm (H) x 209mm (W) x123mm (D)
100x65x45mm
Dust level
IP54
IP53
weight
500g (including battery)
300g (including 3 batteries)
Dermal Filler Injection
Injectable Reborn PLLA Dermal Fillers provide a minimally invasive approach to reducing facial lines and wrinkles and restore volume to the face. Due to their popularity and benefits, plastic surgeons are finding ways to maximize the benefits. A recent study suggests that Reborn PLLA Dermal Filler provide varying degrees of lifting and volumizing effects for each patient.
Scans were taken of the cadavers after dermal fillers were injected and showed significant increases in local soft tissue volume in central areas of the face. By targeting these areas, the facial injections provided local lifting effects, however, the benefits were extremely localized with no accompanying regional effects. But, when dermal fillers were injected in lateral areas such as the temple, mid-face, and jawline, the fillers not only created localized lifting but also regional lifting in neighboring areas of the face.
With these findings, plastic surgeons are seeing the importance of combined injection techniques to provide larger benefits for their patients. For example, if a plastic surgeon added a deep filler injection and a temple injection, the technique provided an additional 17.5 percent increase in lifting the temple, plus a 100 percent increase in lifting the jawline.
Of course Reborn PLLA Filler can also enhance your buttocks and breasts.
Welcome to send inquiry to us for more details.
Face Dermal Filler Injection,Hyaluronic Acid Fillers,Dermal Filler Injection,Fillers For Smile Lines
Rimless Industry Co.,Ltd. , https://www.rebornplla.com