Structural characteristics: The left and right inside of the light incubator are equipped with fluorescent lamps of corresponding power. Special glass with good thermal insulation and light transmittance is set on the outer door and both sides to reduce the heat input from the fluorescent lamp Illumination is required, and it is also convenient to observe the changes of the samples in the box. The temperature control adopts integrated operational amplifier circuit, with LED display and temperature limit protection. The control during illumination is automatically controlled by an advanced intelligent time program controller. The refrigeration system uses special refrigeration methods to improve the reliability and stability of temperature control. The heating system adopts high-performance racket-shaped heating tube, and the magnetic material of the door side liner has good sealing performance. The air circulation in the box uses a micro fan to force convection to ensure uniform temperature in the box. The inner box is made of stainless steel plate, the outer box is made of high-quality cold-rolled steel plate, and the surface is treated with electrostatic spraying. The cabinet is beautiful in appearance, low in noise, simple in operation and convenient in maintenance. It is very popular among users.
Product instructions: There are three types of light incubators: shock light incubator, low temperature light incubator and light incubator. The main function of the oscillating light incubator is microcomputer automatic control, touch switch, easy to operate. Programmable control mode, temperature and light intensity can be set independently during day and night (five levels adjustable). With power-off memory, power-off time automatic compensation function. Constant temperature control system, fast response and high temperature control accuracy. Air duct ventilation, soft wind speed in studio, uniform temperature. The hollow reflective tempered coated glass is used, which has good thermal insulation performance and beautiful appearance. With over temperature and abnormal sensor protection function, to ensure the safety of instruments and samples. Equipped with multi-spectrum imported plant growth lamp, it is conducive to the growth of culture and improve disease resistance. The main parameter of the low-temperature light incubator is the over-temperature and abnormal sensor protection function to ensure the safety of the instrument and samples. Optional full-spectrum plant growth lamp is conducive to plant growth and improve disease resistance. With power-off memory, power-off time automatic compensation function. Constant temperature control system, fast response and high temperature control accuracy. Microcomputer automatic control, touch switch, easy to operate. Programmable multi-section control mode, temperature, humidity, light intensity and time can be set independently during day and night Air duct ventilation, soft wind speed in studio, uniform temperature. The hollow reflective tempered film glass is adopted, which has good thermal insulation performance and beautiful appearance. Optional fully enclosed opaque lampshade, optional studio power supply, disinfection device, etc. The main feature of the light incubator is the use of advanced microcomputer programmable control methods, which can set multiple parameters to simulate day and night. Light touch buttons, easy to adjust ultra-high brightness digital display. Perfect over-temperature protection, more safe and reliable. The working room is equipped with lighting devices for easier observation. The inner box is made of high-quality mirror stainless steel plate with beautiful appearance. The panel control is located on the door for easy operation.
Uses: It can be used for plant germination, tissue, nursery, microbial cultivation, insect, small animal breeding, BOD determination of water quality monitoring, and other constant temperature tests, is biogenetic engineering, medicine, agriculture, forestry, environmental science, animal husbandry , Aquatic products and other production, scientific research, teaching departments are more ideal test equipment.
Precautions for use: 1. After the device is grounded, if the ground is uneven, it should be leveled. 2. Move parallel when moving, and the inclination angle of either side should not be less than 45 degrees. 3. During normal movement, the contents in the box should not affect the air circulation to ensure uniform temperature in the box. Wipe the surface of the equipment frequently to keep it clean. 5. Unused for a long time, the power cord should be unplugged to prevent the device from being electrified and hurt people, and it should be kept running regularly to expel a moisture of electrical components and avoid damage to related devices.
Relying on modern science and technology, the company continuously improves product quality and launches new products to keep it up to the international level. The products are exported to all parts of the country, and have won the trust of users with excellent quality and perfect service. The employees of the company always pursue the enterprise spirit of "unity, truth-seeking and innovation". With the tenet of "customer first, quality first, reputation first", we sincerely welcome new and old customers to visit us for common development and create brilliant!
Compressed air is fed through a fine tip that oscillates at a high RPM (revolutions per minute) rate contained within a coned nozzle.
The high speed and pressure of the compressed air breaks up dirt and debris allowing for quicker, easier, and more effective cleaning.
Car Interior Cleaning Gun,Foam Cannon For Hose,Air Blow Gun,Carpet Cleaning Gun
SGCB COMPANY LIMITED , https://www.sgcbautocare.com