How to maintain the tape tension meter

How to maintain the tape tension meter

Dongguan Haida Instrument 400-071-1808/0769-89280808

The daily maintenance, daily maintenance and inspection standards of the tape tension meter are accurate and error-free, and only the user can really attach importance to maintenance. Only such a product will have a long service life. It is believed that Haida instrument manufacturer technology will analyze and understand for you. How to maintain the tensile tester ?

( A ) Routine maintenance of tensile testing machine

The daily maintenance of the tensile testing machine is generally performed on a daily basis and on a weekly basis. It is also called daily warranty and weekly warranty.

1 . Zhou Baobao

Zhou Baobao is operated by equipment operators every weekend.

(1) Appearance: Wipe the equipment guide rails, transmission parts and exposed parts, clean the work site. To achieve cleanliness inside and outside no dead, no rust, the surrounding environment clean.

(2) Controlling the drive: Check the technical condition of each part, tighten the loose parts, and adjust the fit clearance. Check interlocks and safety devices. The transmission sound is normal, safe and reliable.

(3) Electrical system: wipe the surface of the motor and snake skin, check the insulation and grounding, and achieve completeness, cleanliness, and reliability.

2 . Daily insurance

The daily insurance is performed by the equipment operator on duty

(1) Wipe the equipment before the test, and lubricate and lubricate as required. Check whether the handle position and manual operation position are correct and flexible, and whether the safety device is reliable. Run at low speed to check if the drive is normal.

(2) Pay attention to the sound of operation, temperature, pressure, electrical, instrumentation signals of the equipment, and whether the safety insurance is normal.

(3) Close the switch after the test and put all the handles to zero. Remove iron scraps and dirt, clean the oil on the track surface and sliding surface of the equipment, and add oil. Clean the workplace, organize attachments and tools.

( b ) Level 1 maintenance

Tensile force test machine is a level of maintenance based on the main operator, the maintenance workers to assist, according to the plan to partially dismantle and inspect the equipment, cleaning the prescribed parts, adjust the tension test machine parts of the gap, and tighten all parts of the equipment. . The scope of a guarantee should be all the equipment used by the company, and strict implementation of key equipment. The main purpose of the first insurance is to reduce equipment wear, eliminate hidden dangers, extend the service life of the equipment, and provide guarantees for equipment in order to complete production tasks during the next warranty period.

( III ) Secondary maintenance

The secondary maintenance is mainly based on maintenance workers, and the operation workers participate in the completion. The secondary maintenance is included in the maintenance plan of the equipment, the equipment undergoes some dismantling inspections and repairs, and the worn parts are replaced or repaired. The electrical parts are cleaned, checked and repaired so that the technical conditions of the equipment fully meet the requirements of the specified equipment integrity standards. More testing machine information to make in Dongguan Haida Instrument Co., Ltd.   .