[ Chinese wardrobe net ] The wardrobe is composed of cabinet, door panel and hardware. What kind of board is used to make the wardrobe?
In general, when you want to make a wardrobe when you are decorating, there are several types of plates:
Making a wardrobe sheet 1. Plywood
A plywood is a plate-like material formed by gluing a veneer or a veneer formed by spin-cutting a piece of wood. Commonly there are three plywood, five plywood, nine plywood and twelve plywood (commonly known as plywood, plywood, nine plywood, twelve plywood). Plywood has common defects such as low bonding strength and partial opening, plywood warping.
Making a wardrobe sheet 2. MDF
MDF, there are several, there are many thicknesses, if the wardrobe is generally 1, 2 or 1.5, but the board of the wardrobe is generally called his composite board, there is a single side, two-sided distinction, there is a pattern How much to make with a composite board will make you see some nail holes, not beautiful. MDF oilers are the most convenient, and the construction is between the two.
Wood board can be spliced, nailed, screwed, and the most convenient for construction, but surface treatment is the most troublesome of these. The moisture-proof board is a particle board. Nowadays, it is often seen on the market, it is not covered with paint, and the cost is low. It is often used to make cabinets.
Making a wardrobe sheet 3. Large core board
The cabinet core is made of 12% large core board, which is made of fireproof board or waterproof wood grain paper. The appearance of the 3 cm color panel (there are: Sapele / Blackberry / Red Tan / Elm, etc.) depends on your own personal preference.
There is also a large core board to be attached to the panel, the panel will definitely be painted, the cost and the composite board are completely divided. Of course, in terms of hardness, the quality will definitely be much better. It is better to use the large core board for the wardrobe. The strength of the same level of the finger joint board is not high, but the span of the wardrobe is relatively large, and the required strength is relatively high. If you want to use the direct board, the strength is higher. Sealing the panel, then the cost will increase accordingly.
Making a wardrobe sheet 4. baking sheet
The base of the baking varnish is a MDF, and the surface is baked at a high temperature by six spray-baked imported lacquers (three bottoms, two sides, one light). The 'baked paint' currently used for wardrobes only describes a process in which the paint is treated with a paint-treated substrate door panel that is heated and dried in a drying oven. The paint board is characterized by bright color and easy shape, strong visual impact, very beautiful and fashionable, excellent waterproof performance, strong anti-pollution ability and easy to clean. The disadvantage is that the process level is high and the rejection rate is high, so the price is high; the use should be carefully taken care of, fear of bumps and scratches, it will be difficult to repair once the damage occurs, and the whole should be replaced; the kitchen with more soot is prone to appear. Color difference.
Making a wardrobe sheet 5. Fireproof sheet
The fireproof panel door panel is the most widely used door panel material. Its color is relatively bright, and the edge sealing form is various. It has wear resistance, high temperature resistance, smash resistance, penetration resistance, easy cleaning, moisture resistance, no fading, delicate touch and reasonable price. Etc.
The fireproof door panel substrate is a particle board, a moisture-proof board or a density board, and the surface is decorated with a fireproof board veneer. The price of domestic fire door panels is lower, and the cost of Korean and German plates is increased by 25% and 50%.
The fireproof board conforms to the development trend of the combination of “beauty and practicality†of the wardrobe, so it is prosperous in the market. The disadvantage is that the door panel is a flat plate, and it is impossible to create a three-dimensional effect such as bumps and metal, and the fashion sense is slightly worse.
The fireproof board is a decorative board made of a silicon material or a calcium material as a main raw material, mixed with a certain proportion of fiber materials, lightweight aggregates, binders and chemical additives, and subjected to autoclaving technology.
Making wardrobe plates 6. Solid wood panels
The use of solid wood to make wardrobe door panels, the style is mostly classical, usually at a higher price. The door frame is solid wood, mainly cherry wood, walnut, and oak. The door core is a medium-density board with a solid wood skin. In the production, the surface of the solid wood is generally embossed and painted, so as to maintain the color of the wood and the shape is beautiful. This can ensure the special visual effect of the solid wood, and the combination of the frame and the core board can ensure the strength of the door panel.
Making a wardrobe sheet 7. Particleboard
The particle board takes the plantation, the trunk of the natural forest, the shaving of the branches or the shavings, which are formed at high temperature and high pressure. The advantage is that the expansion rate is small, the stability is strong, and the price is cheap. The disadvantage is that the edge holding force is small, the strength is not enough, and the vision is rough.
Understand the advantages and disadvantages of the various panels of the wardrobe, for the board to do the wardrobe, I must have my own answer, the information is for reference only!
AUTRENDS INTERNATIONAL LIMITED , https://www.petspetscare.com