[ Chinese wardrobe net ] Wardrobe is a large piece of furniture in the home. In order to be durable, in addition to paying attention to some matters during the purchase, post-maintenance is also very important. Temperature and humidity are a major threat to the maintenance of the wardrobe, because we have to strictly control the temperature and humidity of the room during the maintenance of the wardrobe.
â—†temperature
Wood furniture is sensitive to temperature, and the change in temperature plus the inherent thermal expansion and contraction of the wood itself can easily deform the panel of the wardrobe.
1. The position of the wardrobe should be kept away from heat sources (for example, air conditioning vents, heaters, etc.), and the wardrobe should not be placed in direct sunlight;
2, try to choose the quality of the closet veneer, the quality of the closet veneer can withstand the impact of temperature changes, not easy to blister off.
â—†Humidity
Humidity is also an important aspect of the wardrobe. If the humidity of the air is too heavy, it will cause the slab closet to get wet for a long time. The sealing joint will expand and deform due to the increase of water content. If it is serious, it will cause the board to crack. Therefore, we should reduce it. Air humidity damage to the wardrobe.
1. From the source, the wardrobe should be placed close to the damp place (such as the toilet and bathroom), and the container with water should be placed next to the closet to avoid knocking over the wet wardrobe;
2, in the weather with high air humidity, you can use some dehumidifiers in the closet. At the same time, lime and dehumidifier can be used to reduce the indoor air humidity;
3. Choose a veneer with a low water absorption rate. If it is a solid wood veneer, you can choose ash and teak. The expansion and contraction rate is small, and the water absorption rate of maple is large, so you need to choose carefully;
4, protect the edge of the wardrobe sheet, avoid touching water or other solvents, otherwise it will easily appear off the edge. Edge sealing is very important for the moisture resistance of the wardrobe sheet, which can isolate the moisture in the air from the contact with the wardrobe sheet;
5. If the unfortunate wardrobe is drenched with water, you should take "emergency measures" at this time. You should immediately use a dry towel to remove the water, then use absorbent cotton or absorbent paper to blot the remaining water, or blow it off with a hair dryer, but avoid blowing the mouth too close to avoid damaging the wardrobe finish.
It was so worth it to switch from plastic to glass! No more stains, no more scratches, no more replacing worn plastic containers every year! These are the containers we use for leftovers. We usually cook enough dinner for lunch the next day, so hot meals go straight to dinner plates and then into lunch containers. These are also easy to clean, I leave the meal boxes anywhere in the dishwasher, but I usually wash the LIDS by hand. If cleaning is required, the sealing ring inside the cover can also be removed.
Plastic Lunch Box,School Lunch Box,Glass Lunch Box,Plastic Lunch Containers
SY INTERNATIONAL (CN) CO.,LTD , https://www.syplasticbox.com