IPETRONIK's high-performance data recorder supports the collection of multiple protocol signals, such as CCP, XCPonCAN, UDS, J1939, OBDâ…¡, etc. This article mainly describes how to use the CCP / XCP signal acquisition function of the recorder.
System composition:
1. Hardware: IPETRONIK data recorder, including M-LOG V3, FLEETlog2 and IPElog2, etc .;
2. Software: IPEmotion, in addition to configuring the function of a data logger, it also supports real-time observation of signals and offline data analysis.
System icon:
Instructions:
1. Select a CAN channel, click the right mouse button, and select "Import A2L".
2. If the A2L contains multiple protocols, the following window will pop up. Select the desired protocol and click OK. If only one protocol is included in A2L, the selection window will not appear.
3. Check the signals to be collected and assign the appropriate DAQ List.
If there are too many signals, you can use the CSV file prepared in advance to quickly select the signal.
In the CSV file, the first column is the signal name, the second column is the acquisition frequency (Hz), separated by an English semicolon in the middle. The signal name is case sensitive.
Click "Data Acquisition Fill Level" to view the current filling status of each DAQ List.
4. Add the signal to the storage to complete the configuration.
5. Finally, connect the configured data logger to the controller interface to be tested, and you can start collecting CCP / XCP protocol signals. The collected signals will be saved in the memory card that comes with the fuselage. You can also connect the data logger and computer while testing, so you can observe the test data in real time on the IPEmotion software.
IPEmotion icon:
Chroma Key Green Screen,Retractable Green Screen,Mountable Green Screen,Green Screen Background
Dongguan Aoxing Audio Visual Equipment CO.,Ltd , https://www.aoxing-alr.com