[ Chinese wardrobe net ] The identification of the whole wardrobe board, the overall wardrobe is more important is the board, then how to identify the board when purchasing the whole wardrobe? This article will introduce you to this topic, so that you have an understanding of this, let's take a look at it with Xiaobian.
1. Plate material: The surface of the plate is made of melamine veneer. It does not need paint. The surface is fine, the structure is flat, the texture is hard, and it is anti-mite and flame retardant. It is called “no defect plate†in foreign countries. The middle part of the substrate is medium density board, the density can not be lower than 0.80g/cm3, otherwise the bearing capacity and flatness will be affected; the water content can not be lower than 6.5%, but it should not be too high, otherwise it cannot adjust itself according to the change of climate; Surface technology, by hand touch to distinguish whether it is embossed surface or flat, the relief surface is the best; formaldehyde emission 1.1mg / L, to achieve European E1 standard, and test reports, alert to particle board, dyed moisture-proof board. In addition, good plates have anti-ant, anti-mildew and other functions.
2, sheet anti-counterfeiting: brand logo on both sides of the embossed board and edge sealing.
3, smell, water test (too fast and not to be lifted).
4, edge sealing: whether it is smooth, delicate, strong adhesion (pseudo-defective process carefully cracked).
5, the table should be like one: look at the material inside the side plate hole. Of course, be careful of the material inside the cabinet side panel and the solid board and the laminate (four sides) without punching.
6, standard specifications of the board: there are standards, process and precision are guaranteed.
7. Aluminum alloy sliding door frame material: look at the cross section bright and smooth without burr, the minimum wall thickness requirement is 1.1mm;
8. Whether the key hardware accessories are branded with their own brand anti-counterfeiting labels, and the weight (such as drawer guides).
Overall wardrobe
9. Push and pull to listen to the sound to judge the quality of the pulley, but not to say that the sound is as small as possible (may be engineering plastic or nylon); whether the upper rail guide wheel has an adjustment function.
10. In short, carefully understand the sample to prevent consumption traps.
With an experience of over 30 years, Helper created a new subsidiary who produce bakery and pastry making machines which is applied in the processing of noodles, dumpling, pancake, bread, biscuits, Saqima, hamburgers, pizza, steamed buns, etc. Reliable quality and many patent technologies make Helper`s equipment success in this particular market. Made of stainless steel and meeting all health and hygiene standards is the principle of Helper`s machine designing.
Bakery Making Machines,Fresh Noodle Production Line,Vegetable Processing Machines,Pastry Making Machines
Helper Machinery Group Co., Ltd. , https://www.ihelpergroup.com