The low temperature constant temperature bath, also known as the low temperature constant temperature water bath cycle, is a high precision constant temperature source with dual functions of heating and cooling. It is equipped with a circulation pump with liquid circulation function. According to the size of the notch, it can be used for constant temperature experiment in the bath. It can also be connected with other equipment through the hose and used with the constant temperature source. Internal circulation: continuous circulation of the liquid medium in the tank by the circulation pump increases the uniformity of temperature and temperature in the tank and reduces temperature fluctuations. External circulation: through the circulation of the circulating pump, the insulated hose is connected with the external equipment by the water outlet to form a closed loop, which flows back to the water inlet of the equipment, and externally introduces the constant temperature liquid in the tank to establish an external constant temperature field. Widely used in petroleum, chemical, metallurgy, pharmaceutical, biochemical, physical properties, testing and chemical analysis research departments, universities, factory laboratories and metrological quality inspection departments. It is also common in all kinds of cooling or heating equipment used in the medical field, biochemical field, physical and chemical field, and material field.
Box mechanism and materials 1. The super constant temperature water tank body is made up of cold plate sprayed plastic shell, insulation layer, stainless steel inner tank, stainless steel heater heating, and the circulating pump inside the box uses the temperature inside the box more evenly, and can also pass the circulation pump. The circulation function uses the water outlet to connect the heat preservation hose with the external equipment to form a closed loop, which flows back to the water inlet of the equipment, and externally introduces the constant temperature liquid in the tank to establish an external constant temperature field. 2. Outer box material: The outer box body is adopted. High-quality cold plate treated by phosphoric acid film salt after high temperature spray, stainless steel door cover structure 3. Studio material: stainless steel liner 4. Temperature measuring port: PT100 sensor enters from the top of the tank 5. Power cord: power cord is located at the back of the instrument Controller position 6. Controller: located in the upper part of the instrument, built-in control system, compensation wire connection PT100 sensor 7. Heating element: stainless steel electric heater 8. Refrigeration element: high efficiency compressor, built-in control system, compensation wire connection PT100 sensor
Pre roll cones. Preroll ,Pre roll
NANTONG OUFEIYA IMP& EXP CO.,LTD , https://www.nantongoufeiya.com