First, lithographic printing machine
Unlike lithographic and gravure printing machines, lithographic printing presses mainly differ in lithographic printing presses and water supply devices. In addition, lithographic printing mostly uses indirect printing. Therefore, in the printing section of lithographic printing presses, a blanket cylinder is also provided. The images and texts are first printed on the blanket cylinder and then transferred to the paper for printing.
In lithographic printing, direct printing is used for lithographic printing. Flat proofing press is used for round-press flat printing. The vast majority of other types use circular press-type indirect printing, that is, offset printing.
There are many kinds of offset presses. The printing device of the offset press has various models because of the different sizes of the cylinders, and the arrangement and the number of different types. As shown in Figure 5-21.
1. Prepare with paper
Lithographic printing generally uses offset paper, coated paper, map paper, sea drawings, and the use of letterpress paper to print books.
The paper used for lithographic printing is required to be small in stretchability, tight in texture, non-skeined, and non-powdered, and has appropriate properties such as smoothness and whiteness.
The main component of paper is plant fiber, which absorbs moisture from the air. Therefore, the water content of the paper changes with changes in temperature and humidity. The moisture content of the paper changes, and the paper retracts. At the same time, the lithographic process Water is needed. After the paper comes into contact with water, the moisture content also changes. The size of the paper is difficult to maintain. For color printing, overprinting is not allowed. Experiments have shown that a general change in relative humidity of 10% in air causes the paper's moisture content to change by about 1%, and the paper size changes by about 0.1%, which can only control the temperature and humidity of the printing shop and reduce the change in the moisture content of the paper. To control its scaling changes.
Paper is also subject to deformation caused by climate change during shipment, transportation and storage from paper mills. If empty
In order to reduce paper failure during printing, the water content of the paper is adapted to the printing requirements, and it is compatible with the temperature and humidity of the printing environment. The plain printing paper generally needs to be subjected to suitable printing processing, and the processing method is preferably to use a paper-making method. The paper is in line with the temperature and humidity of the printing shop. The water content of the paper itself is even.
In the lithography, the fiber flow direction of the paper is also very important, and the flow direction of the fibers is inconsistent, affecting the paper feeding and overprinting. In order to ensure the accuracy of overprinting, it is preferable that the fiber flow direction of the paper used in the same printing plate is the same. The flow of the paper fibers is generally printed parallel to the print cylinder. In order to know the flow of the fibers of the paper, it is necessary to make judgments before printing. Commonly used methods
Figure 5-22
After the printable paper is cut, it is stacked neatly on the transfer table of the offset press to ensure that printing can be performed smoothly.
2. Mix ink
The inks used for lithographic printing are required to have strong coloring power, sufficient fixation on the paper surface, acid resistance, insolubility in water, strong anti-emulsification, bright color, strong gloss, light resistance, and no fading. Ink factory ink is the original color ink, generally meet the above requirements, the printing plant in the specific use, due to different prints, require different hue, and according to paper and climatic conditions and other differences, the ink to be deployed.
Ink deployment includes: hue in accordance with the sample; viscosity of the appropriate flow; dry oil plus volume is correct, the amount of ink in accordance with the number of prints.
To determine the hue of an ink, first analyze the color of the print, analyze and synthesize the content of the original in the three primary colors, and determine the primary and secondary colors and the blending ratio. At the same time to consider overprinting the color sequence, printed paper, color ink and the nature of accessories, etc., such as the overprint of the ink to have a high degree of transparency, the paper's color will affect the color of the ink is equal. In the deployment of hue, a small amount of color ink must be gradually added until the hue meets the requirements.
The amount of ink is mainly estimated based on the area of ​​the layout graphic, the thickness of the printing ink layer, the strength of the ink absorption performance of the paper, the tinting strength and specific gravity of the ink, the size of the printed matter, and the number of prints. The thickness of the ink layer relates to the viscosity and fluidity of the ink. The viscosity of the ink is too large and the fluidity is small. Ink fountains are not easy to ink, and the ink on the ink roller is not easy to be uniform, so the ink on the ink is uneven. At the same time also caused the phenomenon of paper pulling hair; ink viscosity is too small, fluidity is large, convenient printing, but the layout of the ink absorption enlarged and paste, layout from the dirty phenomenon. The thickness of the ink is generally determined according to the temperature. If the temperature is high, the ink should be thicker and some should be thinner. If the surface of the paper is rough, the texture is loose, and the absorption is large, the ink should be thin, the printing is fine, and the ink should be thick. Printing in the field, the ink can be diluted; the speed of the machine should be faster than the slower speed. In short, all aspects must be comprehensively balanced.
The amount of dry oil depends on the temperature and humidity, the performance of the paper, the thickness of the ink layer, the amount of auxiliary materials to be added, and the performance of the ink jet. Excessive amounts of dry oil will generate ink stacks, blankets, and ink emulsions. , resulting in paste version and other drawbacks; the amount is too small, the ink can not be dried within the required time, the print will produce a scratch, the general principle of the amount of dry oil: coated paper, offset paper more than newsprint, winter more than summer, Diversify the ink more than the dark ink, color sequence in the back of the ink prior to the color sequence more than the amount of ink.
After the ink is dispensed, the ink is loaded into the ink fountain of the offset printing machine, and the inking device is adjusted so that the ink can be uniformly transferred.
3. Dampening potion adjustment
In the lithographic printing process, the layout must ensure that the blank part does not absorb ink after wetting with water, and the wetting water can use pure water. However, during the printing process, the layout is subjected to high-speed friction, so that the hydrophilic layer of the blank part is consumed to supplement. The hydrophilic layer of the layout is consumed, and the electrolyte is added to the water, but the hydrophilicity of the formed inorganic salt layer is not strong. Therefore, the hydrophilic colloid is added in the water to form and supplement the hydrophilic salt on the inorganic salt layer. Body membrane layer. Therefore, fountain solution contains: gum arabic, phosphoric acid, chromic acid, nitric acid and its acid salts.
The commonly used dampening potions are divided into red potion and white potion. The red potion contains chromic acid and its salts, so it is orange-red and the white potion does not contain chromic acid. Both have advantages and disadvantages. The red potion is easy to use when used, but the paper is prone to yellowing, toxic, and harmful to the health of workers; the white potion is free from the effects of chromium poisoning, but the ink is easily emulsified and can cause ink roller deinking.
The fountain solution is generally formulated as a stock solution, which is diluted when used. The dampening solution is acidic, and the acidity has a great influence on the printing plate, and the acidity is too weak. Inorganic salt layer cannot be formed on the plate, poor resistance to oil and water, the graphic part of the expansion, resulting in paste version; too strong acid, the resulting inorganic salt layer is dissolved, plateau grain is destroyed, reduce the resistance to force, accelerate the ink Emulsification; block blot drying, so the pH of the dampening solution must be controlled during printing.
The amount of fountain solution also depends on the nature of the ink, the thickness of the print ink layer, the amount of ink dry oil, the type of printing plate, the layout of the layout, the operating environment temperature, the nature of the paper and other factors.
A good dampening syrup was dispensed into the water bucket of the offset printing press, and the water supply device was adjusted so that the amount of water supplied was in compliance with the printing requirements to ensure the normal printing.
Third, the official printing
The printing plate is installed on the plate cylinder of the offset printing machine. At the beginning of printing, the printing plate should be carefully inspected and calibrated to check the situation of the paper feeding, transfer and collection of the offset printing machine; correcting the pressure, adjusting the printing plate cylinder and the blanket cylinder , Print the relationship between the rollers, so that the pressure is even, and then check the machine for ink, water supply.
When printing, first wipe the film of the printing plate clean, then remove the solid ink with gasoline, start the printing press to test, check the rules, to ensure that the overlay is accurate. Printed samples can be printed in large quantities after passing the approval.
Always check the quality of the product during the printing process, including: the depth of the ink. Accuracy of overlay, clarity of images and texts, actuality of dots, and whether or not there are oil stains in blanks.
The key to ensuring the printing quality in the printing process is the water supply device to provide stable moisture with a minimum amount of dampening solution and control the ink supply of the ink fountain. Foreign use of electronic technology, data processing and computer technology and other advanced technology, manufacturing a variety of printing presses automatic control system. For example, the Heidelberg press in Germany adopts the CPC automatic control system, the CCI system of Roland printing presses, and the PQC system of Komori printing presses in Japan can control the ink transfer amount of ink fountains according to the density of printing plates on the graphic texts. And on the control panel through the button remote control graphic registration and infusion, so that workers get rid of conventional methods of operation, focus on the main tasks, in a more economical way to improve the quality of printing.
Fourth, common faults in lithography
In lithographic printing, various factors are improperly matched, causing problems and affecting the quality of printing. The problems caused by improper handling of paper, ink, dampening syrup, etc. have already been explained in the preparation of printing. Only failures caused by other factors are explained now.
$(function(){ $("#article img").attr("style","display: block;margin: 0 auto;"); })
1. All texts, pictures, audio and video presentations of “Source: China Packaging Network†are marked on this website, and the copyright is exclusively owned by “China Packaging Networkâ€. If you need to reprint, please indicate the source. Any media, website, or individual must indicate "source: China Packaging Network" when reprinting. Violators of this site will be held accountable according to law.
2. The manuscript reproduced and noted by other sources is intended to convey more information for readers and does not imply endorsement of its views or the authenticity of its contents. When other media, websites, or individuals re-publish from this site, they must retain the source of the manuscript noted in this site, and must not arbitrarily tamper with the origin of the manuscript and take legal responsibility.
3. If the reprinted version of this website involves copyright issues, please contact China Packaging Network immediately or by email.
Contact information
×
Welcome, '+oauth_user+' | Bind account | Logout Login' : 'Welcome to your visit| Please login| Wechat login| Free registration| Forgot your password?'; $('#destoon_member').html(destoon_member); $(' #destoon_cart').html(destoon_cart ? ' '+destoon_cart+'' : 0); $(function(){$("img").lazyload();});/*$('#back2top').click (function() { $("html, body").animate({scrollTop:0}, 200); });*/ function scrollx(p) { var d = document, dd = d.documentElement, db = d .body, w = window, o = d.getElementById(p.id), ie6 = /msie 6/i.test(navigator.userAgent), style, timer; if (o) { cssPub = ";position:"+ (pf&&!ie6?'fixed':'absolute')+";"+(pt!=undefined?'top:'+p.t+'px;':'bottom:0;'); if (pr != Undefined && pl == undefined) { o.style.cssText += cssPub + ('right:'+p.r+'px;'); } else { o.style.cssText += cssPub + ('margin-left: '+p.l+'px;'); } if(pf&&ie6){ cssTop = ';top:expression(documentElement.scrollTop +'+(pt==undefined?dd.clientHeight-o.offsetHeight:pt)+'+ "px" );'; cssRight = ';right:expression(documentElement.scrollright + '+(p r==undefined?dd.clientWidth-o.offsetWidth:pr)+' + "px")'; if (pr != undefined && pl == undefined) { o.style.cssText += cssRight + cssTop; } else {o.style.cssText += cssTop; } dd.style.cssText +=';background-image: url(about:blank);background-attachment:fixed;'; }else{ if(!pf){ w. Onresize = w.onscroll = function() { clearInterval(timer); timer = setInterval(function(){ // double select dd.scrollTop is 0 in order to fix xhtml resolution in chrome var st = (dd.scrollTop||db. scrollTop),c; c = st - o.offsetTop + (pt!=undefined?pt:(w.innerHeight||dd.clientHeight)-o.offsetHeight); if(c!=0){ o.style.top = o.offsetTop + Math.ceil(Math.abs(c)/10)*(c1. Easy to carry
The lightweight nature of the plastic sushi box makes it very convenient to carry. Compared to traditional wooden or ceramic sushi boxes, plastic sushi boxes are lighter and do not add extra weight burden. This makes it easy to put a sushi box in a backpack, tote bag or office bag and enjoy delicious sushi anytime, anywhere.
2. Durability makes it more durable
Plastic sushi container are usually made of food-grade plastic materials, which gives them excellent durability. They can withstand daily use and frequent cleaning, and are not prone to breakage or deformation. This means that plastic sushi boxes last forever and don't need to be replaced as often, saving resources and money.
3. Easy to clean and maintain
Plastic sushi boxes are very simple to clean and maintain. Due to the smooth surface of the plastic material, food is not easy to adhere to it, just gently clean with warm water and dish soap. In addition, the plastic sushi box can also be washed in the dishwasher, eliminating the need for manual cleaning.
4. Reusable and environmentally friendly
Plastic sushi tray can be used over and over again and are not discarded like disposable food boxes. This helps to reduce the generation of plastic waste and is more environmentally friendly. Some plastic sushi boxes are also made from recycled materials, further reducing the environmental impact.
Plastic Sushi Container,Sushi Plastic Box,Plastic Sushi Tray,Plastic Sushi Box
EVER GREEN(ZHEJIANG)NEW MATERIAL CO., LTD / KUNSHAN GREENPACK CO.,LTD , https://www.changjingpack.com