[ Chinese wardrobe net ] Wardrobe is essential in the bedroom, the wardrobe can not only be stored, but also play a decorative role. A variety of wardrobes will become the highlight of home life, how to choose the right wardrobe is very important, and custom wardrobes can be tailor-made, environmentally friendly, fashionable, professional and so on. The following is a brief introduction to how to design a custom closet and more suitable custom panel selection criteria.
How to design a custom closet is more suitable
Step 1: Determine the location
When customizing the wardrobe, you must first determine the location, and you can customize the door and interior frame according to the size of the space. It is best to choose a sliding door, which can reduce the obstacles caused by opening the door, and the internal structure can be separated to prevent it from happening.
Step 2: Open mode
Custom closet doors are divided into swing doors, sliding doors and folding doors. The hinged door hinge pressure is not as good as the track, the door panel should not be too wide and too heavy; the sliding door saves space, but the height cannot exceed 2.5 meters. In addition, the wardrobe door is better sealed to prevent dust from entering.
The third step: size
The size of the wardrobe should be precise and sometimes different. The width of a single cabinet in a custom closet is 0.8 meters and the height is 2.2 meters. If the depth is 0.65 meters, it is only 0.6 meters if it is a hinged door.
The fourth step: material
Customized wardrobe material can choose solid wood particle board. This kind of board has good physical properties, good nail holding power and light texture. It will not cause too much pressure on the wardrobe, but the bearing capacity is not weak, and the cost is low and the cost performance is high.
Step 5: Storing the layout
For the storage layout, it can be designed as a flexible partition, which can maximize the storage of clothes. It can also be designed according to the length of the clothes. The pants rack can store pants, and the lattice rack can be used to collect small items or tie items, which is easy and convenient.
Customized wardrobe plate selection criteria
1, different grades, plates are also different
Look at the cut surface of the board, the lower two or four layers of the board on the blockboard are close to the solid wood core, and the high quality blockboard has a flat cut surface with no gaps.
2, look for environmentally friendly sheet
It is necessary to certify environmentally-friendly plates, because some manufacturers will use some non-test reports, which will pose a hazard to human health. Therefore, when purchasing plates, it is necessary to see whether the manufacturer has a national inspection report and relevant test certificates.
3, sheet veneer to see the quality
You can use your fingernails to gently cut the surface of the board. If there are obvious scratches, the quality of the board is poor. The surface of the board used by the professional custom-made wardrobe manufacturers is an environmentally-friendly melamine veneer that has been treated with high temperature and high pressure, with high surface strength, abrasion resistance and scratch resistance.
4, sheet edge sealing to see work
Look at the edge of the sheet metal work, some manufacturers have no professional equipment, rough cutting, surrounded by obvious edge collapse. Some even cut corners and cut only one side, and the edgeless surface absorbs the moisture in the air, causing the sheet to swell, causing the wardrobe to deform and affecting the service life.
Gas Outdoor Grills,Portable Gas Grill,Best Portable Gas Grill,Gas Grill Smoker Combo
Jiangmen Merit Metal Electric Appliance Co.,Ltd. , https://www.meritbbq.com