Fluorescent lamp maintenance tips

[ Chinese wardrobe net ] Fluorescent lamps are widely used in our daily life. Due to the softness of the lighting, not only can the whole room be brightened, but also the visual protection of the infants in the home. If the fluorescent lamp in the home is used for a longer period of time, it is necessary to properly maintain the indoor fluorescent lamp. The following small series will introduce you to the maintenance skills of fluorescent lamps.

Fluorescent lamp maintenance tips include some precautions for using fluorescent lamps and cleaning tips for fluorescent lamps.

First, the use of fluorescent lamps

1. Do not switch the lamp too frequently during the process of using fluorescent lamps. Too frequent lighting will cause the two ends of the lamp to darken prematurely, affecting the output power of the lamp, and it should be noted that it takes 5-15 minutes to restart the lamp after turning off the light.

2. If the voltage is very low, the two stages of the lamp will emit tungsten at the beginning of the lighting, which will cause many point-like pollutants inside the lamp to become one of the causes of lamp damage. Therefore, it is recommended to try to Turn on the light under high voltage conditions.

3, fluorescent lamps have more lines, need auxiliary devices, so must be used with the corresponding transformers, capacitors, etc., to ensure that the lamp is activated to the appropriate power.

4, pay attention to maintain a ventilated environment, not only to take away dust, but also to reduce the temperature of the lamp, in order to extend the life of the lamp.

Second, fluorescent lamp cleaning tips

1. Fluorescent lamp is easy to attract dust. When preparing to clean, turn off the power, then let the indoor air circulate as much as possible. Wipe the lamp gently with a smudged rag and a little detergent. Then use a clean dry cloth to clean the detergent. Wipe clean and never wipe it directly with a damp cloth.

2. If conditions permit, use anti-static tweezers to remove dust from the surface of the lamp, and then wipe the dirt with a dry rag. Do not use too much force.

3. Regularly clean the blower fan blades of the fluorescent lamp. You can take it out and wash it, then wipe the water with a dry cloth to keep the fan blades dry and install.

As long as you have good cleaning skills and pay attention to the various precautions in daily use, I believe that the life of fluorescent lamps in your home will last for a long time.

The above is some of the knowledge about the maintenance of fluorescent lamps introduced by Xiaobian today. After reading it, I believe that everyone has more or less understanding. I hope this article can help you.

Bedroom Bed

Queen Size Bed,King Size Bed,Bunk Beds,Double Bed

Foshan Chengda Furniture Co.,ltd , https://www.catalogfur.com