[ Chinese wardrobe net ] wardrobe board
1. Solid wood board of wardrobe board
The solid wood panel wardrobe plate is made of natural wood. It is durable and natural. Most of it has the unique aroma of natural wood. The solid wood panel wardrobe plate has good moisture absorption and breathability, which is good for human health and does not cause environmental pollution. It is made. High-quality plates for high-end furniture and renovated houses. Because wood panels wardrobe plate high cost, and high construction process requirements, timber resources are limited, and easy construction of artificial board will gradually become the people's choice!
2, the board of the wardrobe board
Particleboard Wardrobe is a kind of artificial board which is made by cutting raw materials such as wood into pieces of certain specifications, dried and mixed with adhesive, hardener and waterproofing agent at a certain temperature. The particleboard wardrobe has a relatively uniform plate structure and good processing performance. It can be processed into large-format plates according to needs. It is a good raw material for making different specifications and styles of furniture. In terms of environmental protection, the amount of glue used in the production process is relatively small, and the environmental protection level is relatively high.
3, high density board of wardrobe sheet
High-density board is a commonly used wood-based board. It is made by shredding and pressing wood, branches, etc. in water. The density is uniform, the strength is high, and the processing is also easy. However, the disadvantage is that the moisture resistance is not good. Kitchens and other wet places should not be used, but it is not bad for making wardrobes.
Wardrobe picking details
1, first look at the selection of the wardrobe
Professional manufacturers use environmentally-friendly plates that meet national testing standards, and some manufacturers use inferior plates that have no test reports and pose a potential threat to human health. Therefore, to buy a wardrobe, we must first look at whether the merchant has a plate inspection report and relevant testing certificate from the national authority inspection department.
2, look at the sheet veneer
Some wardrobes look good on the surface, but with a light stroke on the nails, there will be noticeable scratches. These wardrobes are often made of surface-coated vellum paper or ornate paper sheets with poor abrasion resistance. The professional manufacturer uses the environmentally friendly melamine veneer with thicker immersion paint and high temperature and high pressure treatment, which has high surface strength, abrasion resistance and scratch resistance.
3, look at the edge of the board
Professional manufacturers use precision panel saws to cut sheets, and there is no chipping around the sheets. After sealing around, it can effectively prevent the moisture in the air from invading the inside of the board. Some manufacturers have no professional equipment, not only the rough cutting, but also the obvious edge collapse. Others even cut corners and only sealed the front side of the board. The remaining unsealed surface absorbs moisture from the air, causing the sheet to swell, causing the wardrobe to deform and affecting its service life.
4, see the backplane structure
Professional manufacturers use a backing plate with a thickness of 5mm or more, melamine veneer to prevent the back plate from directly contacting the wall to absorb moisture on the wall. The mainstream custom wardrobe brands on the market are all connected by nail-type backplanes, which are not easily damp, moldy and deformed.
Suzhou Longliqi Imp.&Exp. Co.,Ltd , https://www.longliqiexp.com