Model NO.: GW-300
Voltage of Whole Machine: 380V/50Hz
Weight of Whole Machine: 1000kg
Trademark: Guowei
Transport Package: by Film
Specification: 180x1450x1650mm
Origin: China
HS Code: 84778000
This machine is specially used in folding film material (such as PET, PVC. etc) into reel-shaped packing material.
1. The main motor adopt converter motor, it use vector converter to make it close-circle control, high precision speed, and low speed and high speed equably gluing.
2.Tension control of unwinding adopts 2.5Kg magnetic powder brake(brand KORTIS).With the tolerance of ±0.5kg
3.Automatic Tension control, accelerate and decelerate, which tension can be make up by inertance.
4.Epc adopts(Brand Techmac from USA). Its tolerance can reach ±0.1mm.The max tracking speed is 25mm/s.The ranger of left to right pushing is ±70mm
5.Unwinding adopt 3 inch(74mm) air shaft.
6.The traction steel roller(pressure roller), diameter and width is: 90mm, 320mm, which surface is chromium plated and fine machining.
7.Traction rubber roller, diameter and width is: 90mm, 320mm, which material is polyurethane rubber.
8.Steel roller clutch adopt pneumatic cylinder at both side for working at same time , cylinder diameter: 50mm × 20mm stroke, pressure can be adjusted arbitrarily.
9.Traction rubber roller is independent, synchronous pass, vector inverter motor drive.
10. Rewinding roller adopts 3 inch(74mm) batten type air shaft.
11. Rewinding part use independent motor and magnetic power to control the tesion, magnetic power has lower heating, and realize stable and samll tension control.
12. Rewinding conicity tension(semidiameter- tension curve; speed- tension curve)
13.When reach the rewinding setted length or diameter, it stops automatic. When reach the unwinding smallest diameter, it stops automatic.
14.The gluing part coated with solenoid valve needle valve and equipped with flow metering pump. This pump control the glue flow automatically. It send out glue and close the glue system when start or stopÂ
More details
Â
Main configuration:
Â
Â
Workshop
Exhibitions
FQA
Packaging &Â Delivery
1.Packaging Details: wooden pallet or plastic film
Â
2.Delivery Detail: 30-60 days
Â
3.Port: Ningbo port
Â
1.Where is your factory Located
Our Factory Located in Ruian City ,Zhejiang Province ,China .
It is about 40minutes by plane from Shanghai,  about 5 hours by train from
Shanghai .
We are pleasured to pick up you when you arrived .
2. What should we charge for your engineer?
Our engineer is available to go to your country to install the machine for you. Buyer have to bear the charges including round-trip tickets, cost of visa and accommodations .Salary for one engineer is 80USD per day.Â
3. How long is your machine's warranty period?
All our machine have one year guarantee, starting from finished installation
1. The main motor adopt converter motor, it use vector converter to make it close-circle control, high precision speed, and low speed and high speed equably gluing.
2.Tension control of unwinding adopts 2.5Kg magnetic powder brake(brand KORTIS).With the tolerance of ±0.5kg
3.Automatic Tension control, accelerate and decelerate, which tension can be make up by inertance.
4.Epc adopts(Brand Techmac from USA). Its tolerance can reach ±0.1mm.The max tracking speed is 25mm/s.The ranger of left to right pushing is ±70mm
5.Unwinding adopt 3 inch(74mm) air shaft.
6.The traction steel roller(pressure roller), diameter and width is: 90mm, 320mm, which surface is chromium plated and fine machining.
7.Traction rubber roller, diameter and width is: 90mm, 320mm, which material is polyurethane rubber.
8.Steel roller clutch adopt pneumatic cylinder at both side for working at same time , cylinder diameter: 50mm × 20mm stroke, pressure can be adjusted arbitrarily.
9.Traction rubber roller is independent, synchronous pass, vector inverter motor drive.
10. Rewinding roller adopts 3 inch(74mm) batten type air shaft.
11. Rewinding part use independent motor and magnetic power to control the tesion, magnetic power has lower heating, and realize stable and samll tension control.
12. Rewinding conicity tension(semidiameter- tension curve; speed- tension curve)
13.When reach the rewinding setted length or diameter, it stops automatic. When reach the unwinding smallest diameter, it stops automatic.
14.The gluing part coated with solenoid valve needle valve and equipped with flow metering pump. This pump control the glue flow automatically. It send out glue and close the glue system when start or stopÂ
More details
Â
Main configuration:
Â
| PLC (H2U-1616MT) 1 piece | INOVANCE |
| PLC (H2U-4DA) 1 piece | INOVANCE |
| Touch screen (7.0inch,65535colour) Â 1 piece | MCGS |
| Main converter  (MD320NS1.5GB) 1 piece | INOVANCE |
| Rewinding converter  (MD280NS0.7GB) 1 piece |
INOVANCE Â |
| PG Card (MD32PG) 1 piece |
INOVANCE Â |
| EPC( servo motor ultrasonic traction) 1 piece | TECHMACH from USA |
| Glue pump(Model 100) 1 piece | Taiwan |
| Unwinding Magnetic power (25N/M) 1 piece | Weizheng Taiwan |
| Rewinding Magnetic power (25N/M) 1 piece | Weizheng Taiwan |
| Main converter motor (1.5kw) 1 piece | FUKUTA Taiwan |
| Rewinding motor(0.75kw) 1 piece | FUKUTA Taiwan |
Workshop
Exhibitions
FQA
Packaging &Â Delivery
1.Packaging Details: wooden pallet or plastic film
Â
2.Delivery Detail: 30-60 days
Â
3.Port: Ningbo port
Â
1.Where is your factory Located
Our Factory Located in Ruian City ,Zhejiang Province ,China .
It is about 40minutes by plane from Shanghai,  about 5 hours by train from
Shanghai .
We are pleasured to pick up you when you arrived .
2. What should we charge for your engineer?
Our engineer is available to go to your country to install the machine for you. Buyer have to bear the charges including round-trip tickets, cost of visa and accommodations .Salary for one engineer is 80USD per day.Â
3. How long is your machine's warranty period?
All our machine have one year guarantee, starting from finished installation
Leather Chair,Leather Lounge Chair,Leather Desk Chair,Brown Office Chair
Feat Top International(China) CO.,LTD , http://www.loungefurniture.cn