[ Chinese wardrobe net ] Home products wardrobes are generally purchased directly from the market, and now it is very good to make a wardrobe. However, the homemade wardrobe can be made into the style that you want, so how do you make your own wardrobe? Let's learn together with Xiaobian.
First, measurement
Measure the size of the wardrobe location, including: length, width and height (the minimum height is very important), determine the size of the wardrobe, length 165cm * width 55cm * height 260cm.
Second, the production process is determined by making plates
1. Before the production, the plate can be wrapped and sealed with plastic paper and compacted with heavy objects.
2. During the production process, pay attention to the flattening of the cut plates after the daily work, and add plastic film to prevent deformation.
3, the side panel of the closet is made by adding a frame to prevent deformation.
4. Apply tung oil, varnish, etc. in time after installation to prevent deformation and cracking.
Third, the use of tools
1, Bu sent seven-inch electric circular saw, flipped.
2, Bu Pai engraving machine, flipping.
3, universal rail.
4, square machine. There is no good drill bit. After the adjustment is completed, the punching speed and quality are acceptable.
5, 7 inch electric circular saw. Used to match the guide rails, mainly used for cutting boards. The quality and precision of the electric circular saw are still acceptable, and it is prone to problems such as the inclination of the cut surface. It needs to be adjusted several times, and cooperates with the guide rail to solve the problem of opening the plate.
6, hand drill. Hole opener, matching drill bit, cross bit, used for opening, drilling, and screwing.
7, the tool. There are mainly 12.7-inch straight knives, door knives, dovetail knives, 1/4-handle balls, 3-tooth knives, several drill bits, and 3.5 hole boring devices (for installing pipe hinge openings).
Fourth, cutting board and production
1. Fabrication and installation of the side panels of the wardrobe.
a, size: height 200cm * width 55cm
b, sheet cutting size:
The 1 frame is mounted in a å¯æ¦« structure with a single hoe length of 4 cm. Use tools: square boring machine, flip-chip electric circular saw.
End frame (1 & 2): length 55cm * width 10cm * thickness 2cm
Side frame (3 & 4): length 188cm * width 10cm * thickness 2cm
2 The middle baffle and the frame are processed by the door knife, and the processing depth is 1.11cm. Use tools: flip-chip engraving machine, door knife.
Middle border (5): length 41.2cm * width 10cm * thickness 2cm
Middle baffle (6&7): length 87.2cm*41.2cm* thickness 1.7cm
2, wardrobe top and bottom plate production and installation
a, size: length 161cm (closet length 165cm-2 vertical plate thickness 4cm) * width 55cm * thickness 1.7cm. The width needs to be adjusted according to the actual size of the finished side panel of the wardrobe.
b. Installation process: Due to the limitations of personal technology and sheet properties, metal connectors are used for installation.
c. Punch positioning: According to the finished wardrobe vertical board, the horizontal board and the vertical board are stacked, and the top is 1.7cm thick wood board as the standard, the top board position is reserved, and the line is drawn to determine the punching position. The bottom plate method is the same
3. Intermediate vertical board production and installation
a, size: length 193.6cm * width 55cm * thickness 1.7cm
b. Size determination method: Take the finished side panel of the wardrobe as reference, and reserve the following dimensions: top plate size 1.7cm + bottom plate size 1.7cm + wardrobe foot line height 3cm = 6.4cm
c. Punch positioning: take the finished top and bottom plate as reference, stack the vertical plate with the top plate and the bottom plate, and determine the width and draw the hole for positioning.
d. After the completion of this step, the back panel groove should be reserved for the vertical side panel, the top panel and the bottom panel, and the intermediate vertical panel.
4, the production and installation of the crosspiece
In the third step c step, when the vertical plate is punched and positioned, the 1.7 cm thick wooden board is fixed at the punching position, and the remaining distance is the horizontal baffle size.
b. Punch positioning: stack the side panel and the middle vertical panel of the wardrobe, reserve 1.7cm at the top, and then determine the punching position of the horizontal baffle according to the function setting of the wardrobe.
5, backplane size and installation
Dimensions: The size of the backing plate is determined according to the method of determining the size of the transverse baffle in step 4. Considering the groove size of the backing plate, it is increased by about 1 cm.
6, cabinet door production and installation
Assemble the cabinet and determine the door size according to the actual size of the wardrobe.
The homemade wardrobe sounds complicated, but Xiao Bian feels that it is not as difficult as imagined. The above-mentioned Xiaobian learned a self-made wardrobe method, interested friends can refer to their own try, but also a skill. If you want to know more about home, please stay tuned.
Hair Color Shampoo,Hair Dye Shampoo,Hair Color Dye Shampoo,Hair Dye Color Shampoo
DELIN HAIR COSMETICS , https://www.hairdyecolorfactory.com